As a grinding tool resin cutting sheet in the use must pay attention to the operation of the specification, otherwise it will be easy to accident.

Usage specification:

I. the safety rules of GB2494 abrasive tools shall be observed when using the cutting pieces;

2. The cutting pieces are only allowed to be installed and used in a single piece, and two or more pieces are strictly prohibited to be installed and used at the same time;

Iii. The cutting speed shall not exceed the working line speed stipulated by the cutting brand. When using the pneumatic sander, the cutting speed shall be prevented from exceeding the maximum speed due to the unstable air pressure.

4. The resin cutting sheet shall be stored for one year, after which the resin cutting sheet shall be re-inspected for rotation, and the resin cutting sheet shall be used after being confirmed qualified.

5. when using the cutting sheet to slowly into the force, too hard easy to stall, stuck and smashed cutting sheet phenomenon, if stuck should immediately lift the cutting sheet, so as to avoid burning or broken cutting sheet.