Flap disc belongs to the power tool accessories, mainly applicable to: metallurgy, machinery, light industry, wood products, furniture, hardware, plastic, melamine, building materials, automotive, leather, textile and other industries of polishing, polishing, polishing.
Flap disc for grinding metal, also for grinding wood, can not be mixed.
Three tips to improve the performance of flap disc
1, The right choice
The correct selection of flap disc can ensure that 100 flaps are maximized. The cutting force of flap disc with good quality is relatively strong, which can adapt to the cutting treatment of materials with different strength. Its heat-resistant and wear-resistant characteristics can also finish large-scale equipment grinding and polishing, with strong hardness and service life is up to several times more than similar cutting products.
2, Enough pressure
Overuse can overload and overheat the blades, which can lead to faster blade wear and reduce the effectiveness of abrasives. At the same time, if there is not enough pressure to use, flap disc will not engage with the metal, not enough to effectively grind the surface, which will lead to longer grinding time and further wear.
3, The correct use
Flap disc are designed to work at an Angle. The Angle depends on what you're making and what you're grinding, however, generally in the flat/horizontal range of 5-10 degrees. If the Angle is too flat, too many blade particles will immediately connect to the metal, causing flap disc to wear out faster. If the Angle is too high, the flaps cannot be fully used. This will lead to excessive wear on some of the flaps and insufficient polishing.