Knowledge of the use of grinding wheel

    2019-12-27   reading

    Knowledge of the use of grinding wheel 

    Knowledge of the use of grinding wheel _grinding wheel_flap wheel factory_flap disc manufacturer_zirconia abrasive belt

    1. When the grinding wheel is installed, it should be idled for 1-2 minutes before it is formally used;Before use, operators need to wear goggles, dust mask, gloves and other safety protective equipment.

    2. The speed of grinding wheel shall not exceed the working line speed specified by the trademark. When using pneumatic grinding machine, especially when multiple machines use the same air source, the air pressure shall be well controlled to prevent excessive air pressure from exceeding the maximum operating speed and causing injuries caused by grinding wheel blasting.

    3. When using the grinding wheel, the grinding wheel should be pressed slowly. If the grinding wheel is stuck, it is easy to break the grinding wheel.

    4. When cutting and polishing the workpiece, the workpiece must be fixed.It is not allowed to stand in front of the workpiece, and it is not allowed to fold and cut multiple workpiece, so as to avoid grinding wheel sticking and causing accidents.

    5. The side of the grinding wheel shall not be used for grinding.During cutting, no pressure shall be applied to the side of the grinding wheel


    facebook linkin Twitter google

Wechat Service