Notes on the storage of the flap disc

After the production of the flap disc, it is impossible to use it with the production. There will be a storage process. The storage of the flap disc is also a matter of learning. Usually, the following five points should be noted during the storage process.

flap disc,flap wheel factory,aluminium oxide flap disc,zirconia abrasive belt

1. It must be completely packaged and transported to avoid collisions. It should not be exposed to moisture for a long time, and it should not be in contact with alkalis;

2, stacked in a flat manner, can not be placed and pressed for a long time to prevent deformation;

3, to avoid direct contact with the ground, must be stacked with a moisture-proof wooden pallet, the height of the ground is 10-15cm, the stacking height is not more than 1 meter;

4. Implement advanced first-use principles to ensure the best use period of products;

5. The product should be re-tested for the strength and appearance of the rotation for more than one year.