First, how to use the angle grinder to finish the glass edge

The angle grinder finishes the glass edge: it is first polished with a grinding wheel and polished with a polishing wheel.

8MM thick glass with a edging machine is better.

grinding disc,flap disc manufacturer,flap wheel factory,polishing disc

Angle grinder: Angle grinder is a portable electric tool that uses FRP cutting and grinding. It is mainly used for cutting, grinding and brushing metal and stone.

Principle: The electric angle grinder uses the high-speed rotating thin-plate grinding wheel, rubber wheel, wire wheel, etc. to grind, cut, rust and polish the metal components. Angle grinders are suitable for cutting, grinding and brushing metal and stone, and water is not allowed for work. Guide plates must be used when cutting stone. For layouts equipped with electronic controls, grinding and polishing can also be performed if appropriate accessories are installed on such machines.

The main functions of the edger: open chute, 45° chamfer polishing, arc edger, trimming.

Second, what kind of grinding is good for grinding glass?

The ground glass is polished with stone glass.

grinding disc,flap disc manufacturer,flap wheel factory,polishing disc

The grinding disc is a fixed abrasive which has a certain strength by a bonding agent to fix a common abrasive into a certain shape (mostly circular, with a through hole in the center). It is generally composed of abrasives, binders and pores, which are often referred to as the three elements of a fixed abrasive. According to the different classification of the bonding agent, ceramic (bonding agent) grinding wheel, resin (bonding agent) grinding wheel and rubber (bonding agent) grinding wheel are common. It has a wide surface and can be used for rough grinding, semi-finishing and fine grinding, and slotting and cutting of the outer circle, inner circle, plane and various profiles of metal or non-metal workpieces.