The grinding wheel has low strength and is susceptible to temperature, humidity, vibration, collision, extrusion and storage time. It is important to prevent the accident from properly storing the grinding wheel. To do this, the following points should be achieved:

Undefined

Storage location

◆The grinding wheel should be stored on a dedicated storage rack.

◆ Abrasives should be placed separately according to specifications. Marks should be placed in the storage to avoid confusion and errors. The placement method should be determined according to the size of the grinding. Grinding tools with large or thick diameters should be placed upright and slightly inclined. Thinner and smaller grinding wheels should be placed flat, but should not be too high, and a flat iron plate should be placed underneath it to prevent deformation of the grinding wheel. Or rupture.

◆The grinding tools should be stored in a dry place, the room temperature should be no less than 5 degrees Celsius; when the grinding wheels are stacked, the stacking height should not exceed 1.5m.

transport

◆When the wheel is transported, it cannot be installed with metal objects; it reduces vibration and impact.

◆When the wheel is stored, the handling should be reduced as much as possible to prevent cracks from collision and vibration. The grinding wheel is brittle and should not be hit, dropped or collided.

Undefined

Storage environment is long and long

◆When storing the rubber bond grinding wheel, be careful not to touch the oil; the ceramic running-in should not be placed in a wet or frozen place, otherwise the strength and grinding force of the grinding tool will be reduced.

◆Resin, rubber bond grinding wheel should be sandwiched between two smooth and flat metal plates. The metal plate should be larger than the diameter of the grinding wheel. Do not put it under the damp and fan to prevent bending deformation.

◆The grinding wheel can't be stored for a long time. If the resin and rubber will deteriorate for more than one year, it must be strictly inspected before use.

◆Rubber, resin bond sheet grinding wheel should be prevented from deformation when stored.

◆ The preservation of the grinding wheel shall be subject to the manufacturer's instructions, and the expired grinding wheel shall not be used casually.