Polishing fluid properties and application range of abrasive materials

    2019-10-15   reading

    Polishing fluid properties and application range of abrasive materials

    For metal, hardware, and stainless steel workpieces, the requirements for abrasive polishing materials are also very high. At the same time, the selection and use of polishing fluids for abrasive materials are required. The polishing material polishing liquid is formed by a composite abrasive such as high-purity silica to form a composite polishing material polishing liquid of a primary particle diameter, and a special modification treatment agent is added to be dispersed in the emulsion.

    Polishing fluid properties and application range of abrasive materials_polishing wheel_flap wheel factory_flap disc manufacturer_abrasive tools

    polishing wheel,flap wheel factory,flap disc manufacturer,abrasive tools

    Polishing and polishing material polishing liquid has high permeability, high strength, high adhesion, film forming activity, high weather resistance and strong thixotropic properties:

    First, high purity, effectively reduce the contamination of electronic products

    Second, the polishing material has a high polishing rate, and the particles are dispersed uniformly to achieve high-speed polishing.

    Third, high flatness processing, this product polishing is the use of particles of nano-SiO2 and other materials, will not cause physical damage to the workpiece, to achieve high flat processing

    Precautions for the use of polishing material polishing solution: Since the product will gradually thicken or even freeze after storage for a period of time, it is recommended to use a water: solution = 1:1 ratio for dilution, and it is recommended to use a dispersing device to stir. Evenly (better effect) and then add. At the time of addition, attention should also be paid to the viscosity of the liquid to avoid the problem of heavy flocculation due to the low viscosity of the base material or the low shear rate.

    The main application areas of polishing fluids include:

    First, polishing material polishing liquid is widely used in nano-scale chemical mechanical polishing, such as: silicon wafer, compound crystal, precision optics, hard disk, gemstone and other nano-scale and sub-nano polishing.

    Secondly, the polishing liquid product can be used as an additive, and can also be applied in the fields of water-based adhesives and high weathering exterior wall coatings.


    facebook linkin Twitter google

Wechat Service